LED Lighting Products Store
Cabinet Light - 720 Lumen - 12 Watts - Aluminum Housing
Cabinet Light - 720 Lumen - 12 Watts - Aluminum HousingBuy American Compliant The LEDUC4 LED Cabinet Light is designed as a versatile lighting solution for boat walkways, steps, navigation areas, counterspaces and other areas where low voltage is available and an effective yet unobtrusive light fixture is needed. This LED courtesy light produces 720 lumens of pure white light while using only 1 amp at 12 volts. This LED Cabinet Light is fully sealed within a weatherproof aluminum chassis fixture that features a very small profile for easy and unobtrusive mounting in tight and space limited areas. This LED light is rated waterproof to 60 meters and is ideal for marine applications. These lights feature a small 4.25 inch diameter profile that lends itself well to a wide variety of applications both utilitarian and asthetic and are available in optional light colors including red, white green, blue, or infrared. These LED lights are ideal for use in areas where space is limited as general area lighting, or as primary light sources on decks and walkways. This LED light is available in spot or flood configurations. Spot configurations are ideal for specialty applications while flood configurations are very effective for general area lighting. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge These units are fully sealed, weatherproof and constructed of aluminum with stainless steel hardware for durability and corrosion resistance. Measuring only 4.25" in diameter and 1.25" in total thickness, these compact units are designed for surface mounting in either interior or exterior applications. The 720 lumen light output at approximately 12 watts @1 amp draw of these LED lights makes them ideal for applications where power management is critical such as boats and RV's. Waterproof to 60 meters for marine environments, these versatile LED lights are mounted via three screws and a 3/8 inch hole for wiring. The LEDs are housed within a hard anodized and powder coated aluminum chassis that provides excellent strength and durability. This LED light has a 4 foot wire terminated in a female 2 pin Deutsch connector. The male plug parts are included for attachment. This light can be operated on voltages ranging from 9 to 42 VDC without the need for any extra hardware. The light will sense the voltage and adjust the current sent to the LED accordingly. The LEDUC4 is ideal for various applications that include; cabinet lighting, dock lighting, engine bay compartments, confined spaces, overhead lighting, deck lighting, and transom mounting. Red, white and infrared colors are in stock and ship immediately. Other colors may have lead times to 3 weeks. Please contact sales@Magnalight.com for more information. -------------------------------------------------------------------------------- Specifications / Additional Information -------------------------------------------------------------------------------- LEDUC4 LED Cabinet Light Features Lamp T
Related Products
20 Watt LED Boat Light- 1720 Lumen - 375'L X 70'W Spot Beam - 9-46 VDC - Extreme Environment
20 Watt LED Boat Light- 1720 Lumen - 375'L X 70'W Spot Beam - 9-46 VDC - Extreme Environment Buy American Compliant The LEDPB10W-20E LED Boat Light is IP68 rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. A 1,720 lumen light output with low wattage and amp draw, a 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-20E LED boat light from Magnalight produces 1,720 lumens of bright light while drawing only 20 watts @1.7 amps from a 12 volt electrical system. Two CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 375' long by 70' in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. Click here to read an article on the advantages of LED Boat lights over incandescent, fluorescent, or HID Boat lights. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. This photo shows an open field illuminated only by ambient light at approximately 9:00 pm'. This particular snapshot shows the LEDPB10W-20E being used to illuminate the field and a sign in the distance. This photo shows the LEDPB10W-20E illuminating the 'Larson Electronics' sign positioned at approx. 400'. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED's core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LED
High Intensity LED Boat Light - 12, 10-Watt LEDs - 10320 Lumen - Extreme Environment
High Intensity LED Boat Light - 12, 10-Watt LEDs - 10320 Lumen - Extreme Environment Buy American Compliant The LEDPB10W-120X2E LED Boat Light is IP68 rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resistant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. 10,320 lumens of light output with low wattage and amp draw, 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-120X2E LED light bar from Magnalight produces 10,320 lumens of bright light while drawing only 120 watts @10 amps from a 12 volt electrical system. Twelve CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are arranged in two rows and paired with high purity optics to produce a 20 degree spread spot beam approximately 875'long by 100' in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. Click here to see the benefits of using LED Boat Lights compared to HID lights on your boat. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. This photo shows an open field illuminated only by ambient light at approximately 9:00 pm'. This photo shows the LEDPB10W-120X2E. In flood configuration, the light passes the 'Larson Electronics' Sign more than 750 feet away, yet still provides a large width for work area illumination. This image shows a close up picture of the 'Larson' sign, notice that the beam output still reaches farther than the sign positioned 750 feet away from the unit. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED's core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowin
Surface Mount LED Light - Machined Aluminum - 10-30Volts - 90mA draw - Courtesy or Down Light
Surface Mount LED Light - Machined Aluminum - 10-30Volts - 90mA draw - Courtesy or Down LightBuy American Compliant The LEDSM90 LED Surface Mount Down Light is designed as an extremely efficient and versatile lighting solution for boat walkways, cabin areas, navigation areas, staterooms and other areas where low voltage is available and an attractive yet subdued light fixture is needed. This LED down light produces 72 lumens of pure white light while using less than 1 watt at .90mA and covers approximately 10 feet of area. This High Intensity LED Area Light is fully potted and housed within a weatherproof, anodized aluminum fixture that features a very shallow profile for easy and unobtrusive mounting in tight and space limited areas. These lights feature a very small profile that lends itself well to a wide variety of applications both utilitarian and asthetic and are available in optional colors including white, red or blue. These LED down lights are ideal for use in areas where space is limited as accent or general area lighting, or in solar power applications where low voltage is the only power source available. This image shows a 53' container with no illumination This image shows the same trailer, this time illuminated with the LEDSM90 White This image shows the same trailer, this time illuminated with the LEDSM90 Red Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge These units are fully sealed, weatherproof and constructed of 306 aluminum alloy with an anodized satin finish. Measuring only 1 and 3/4" in diameter and 3/8" in total thickness, these compact units are designed for surface mounting in either interior or exterior applications. The below 1 watt, .90mA draw of these LED lights makes them ideal for low power applications such as those found at docks and on sailboats where solar power is used to power low level area lighting. USCG certified waterproof for marine environments and IP67 compliant, these versatile down lights are mounted via three self tapping screws that countersink into the aluminum housing for a flush fit. They provide an ideal lighting solution for closets, walkways, bathrooms, cabins, flying bridges and just about anywhere an efficient and unobtrusive light is needed. -------------------------------------------------------------------------------- Specifications / Additional Information -------------------------------------------------------------------------------- LEDSM90 LED Down Light Certification-Features Lamp Type: LED USCG certifiedfor marine environments Dimensions: 1 3/4 " Diameter 3/4 " Depth Very low profile Watts: -1 Marine grade aluminum housing Voltage: 12 VDC Only Low .90mA draw Mounting: Flat SurfaceMount IP67 Compliant-waterproof Wiring: Coventional 2 Wire Single Ground 3 Color Options Amps: .90mA on 12 volts Lumens: 72 LED Life Expectancy: 50,000 hours -------------------------------------------------------------------------------- Materials: Aluminum Housing Special Orders- Requi
