LED Lighting Products Store
Filite Warm White G4 5050 15 SMD LED Bulb Wide Angle/ Disc Type G4 Base Side Pin 15 SMD LED, 10 Watt Holagen Bulb Replacemnt For RV Camper Trailer Boat Marine
This product has 15 high-powered led bulbs, which produce about a 2-3 watt Lumens bulb. The light pattern is perfect for illuminating displays or even just adding accent lighting yet it is still bright enough to be used anywhere. It can be used in chandeliers, coach lanterns, decorate applications and so on.
Related Products
Surface Mount LED Light - Machined Aluminum - 10-30Volts - 90mA draw - Courtesy or Down Light
Surface Mount LED Light - Machined Aluminum - 10-30Volts - 90mA draw - Courtesy or Down LightBuy American Compliant The LEDSM90 LED Surface Mount Down Light is designed as an extremely efficient and versatile lighting solution for boat walkways, cabin areas, navigation areas, staterooms and other areas where low voltage is available and an attractive yet subdued light fixture is needed. This LED down light produces 72 lumens of pure white light while using less than 1 watt at .90mA and covers approximately 10 feet of area. This High Intensity LED Area Light is fully potted and housed within a weatherproof, anodized aluminum fixture that features a very shallow profile for easy and unobtrusive mounting in tight and space limited areas. These lights feature a very small profile that lends itself well to a wide variety of applications both utilitarian and asthetic and are available in optional colors including white, red or blue. These LED down lights are ideal for use in areas where space is limited as accent or general area lighting, or in solar power applications where low voltage is the only power source available. This image shows a 53' container with no illumination This image shows the same trailer, this time illuminated with the LEDSM90 White This image shows the same trailer, this time illuminated with the LEDSM90 Red Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge These units are fully sealed, weatherproof and constructed of 306 aluminum alloy with an anodized satin finish. Measuring only 1 and 3/4" in diameter and 3/8" in total thickness, these compact units are designed for surface mounting in either interior or exterior applications. The below 1 watt, .90mA draw of these LED lights makes them ideal for low power applications such as those found at docks and on sailboats where solar power is used to power low level area lighting. USCG certified waterproof for marine environments and IP67 compliant, these versatile down lights are mounted via three self tapping screws that countersink into the aluminum housing for a flush fit. They provide an ideal lighting solution for closets, walkways, bathrooms, cabins, flying bridges and just about anywhere an efficient and unobtrusive light is needed. -------------------------------------------------------------------------------- Specifications / Additional Information -------------------------------------------------------------------------------- LEDSM90 LED Down Light Certification-Features Lamp Type: LED USCG certifiedfor marine environments Dimensions: 1 3/4 " Diameter 3/4 " Depth Very low profile Watts: -1 Marine grade aluminum housing Voltage: 12 VDC Only Low .90mA draw Mounting: Flat SurfaceMount IP67 Compliant-waterproof Wiring: Coventional 2 Wire Single Ground 3 Color Options Amps: .90mA on 12 volts Lumens: 72 LED Life Expectancy: 50,000 hours -------------------------------------------------------------------------------- Materials: Aluminum Housing Special Orders- Requi
20 Watt LED Boat Light- 1720 Lumen - 375'L X 70'W Spot Beam - 9-46 VDC - Extreme Environment
20 Watt LED Boat Light- 1720 Lumen - 375'L X 70'W Spot Beam - 9-46 VDC - Extreme Environment Buy American Compliant The LEDPB10W-20E LED Boat Light is IP68 rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. A 1,720 lumen light output with low wattage and amp draw, a 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-20E LED boat light from Magnalight produces 1,720 lumens of bright light while drawing only 20 watts @1.7 amps from a 12 volt electrical system. Two CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 375' long by 70' in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. Click here to read an article on the advantages of LED Boat lights over incandescent, fluorescent, or HID Boat lights. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. This photo shows an open field illuminated only by ambient light at approximately 9:00 pm'. This particular snapshot shows the LEDPB10W-20E being used to illuminate the field and a sign in the distance. This photo shows the LEDPB10W-20E illuminating the 'Larson Electronics' sign positioned at approx. 400'. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED's core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LED
LED Light Bar - Chrome Housing - 8 LEDs - 24 Watts - 325'L X 70'W Beam - 1440 Lumen - 9-42VDC
LED Light Bar - Chrome Housing - 8 LEDs - 24 Watts - 325'L X 70'W Beam - 1440 Lumen - 9-42VDCBuy American Compliant The Magnalight LEDLB-8-CHR LED Light Bar offers high light output and a compact profile combined with versatile mounting and power options. This IP67 rated LED light bar is waterproof to one meterand produces 1,440 lumens while drawing only 24 watts of power @2 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 VDC and provides a durable and compact lighting solution that is ideal for use in commercial marine environments as well as industrial and manufacturing applications such as machine vision system lighting, vehicle and heavy equipment illumination. These chrome LED light emitters are a new addition to our LED line up. They offer a new clean, sleek design while still offering a bright, high quality light the same as their sister LEDs. The LEDLB-8 LED light bar from Magnalight produces a 325' long by 70' wide light beam with 1440 lumens of bright light. Eight Edison Edixeon® Emitters containing CREE EZBright® three watt LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light bars are IP67 rated and waterproof to 1 meter, sealed against intrusion by dust and dirt and ruggedly constructed to withstand demanding environments, conditions and applications. The entire Magnalight LEDLB series are constructed of extruded aluminum and feature low profile compact housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This image shows a dark street, illuminated by nothing but distant street lamps and suburban lighting. The same street illuminated with the LEDLB-8-CHR, easily reaching the tree and illuminating it's branches over 110 yards away. Click Photo to Enlarge Click Photo to Enlarge *We have had excellent feedback from boat builders and other marine applications where they are able to create lighting effects on the mast, etc. that typically cost 10 times as much but with little amp draw. The efficiency of the driver board makes this type of amp draw attractive for current constrained applications including small equipment, ATVs, boats and other applications where banks of batteries without significant alternator support are the sole source of power. These units are also ideal for use in manufacturing and industrial operations as machine lighting where severe vibration and excessive amounts of dirt and grime may be encountered. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce
